Metadata for Montana 2013 NAIP Orthoimagery - Web Service Metadata for Montana 2013 NAIP Orthoimagery - Web Service

Download full XML Metadata

Identification Information:

Citation:

Originator: USDA-FSA-APFO Aerial Photography Field Office

Publication date: 2014

Title: Montana 2013 NAIP Orthoimagery - Web Service

Publisher: Montana State Library

Online linkage: https://gisservicemt.gov/arcgis/rest/services/MSDI_Framework/NAIP_2013/ImageServer

Larger Work Citation:

Title: Montana 2013 NAIP Orthophotos
Online linkage: https://mslservices.mt.gov/Geographic_Information/Data/DataList/datalist_Details.aspx?did={a5a64e60-aac0-11e3-9be7-425861b86ab6}

Abstract:

This is an ArcGIS Server Image Service of the 4-band 2013 National Agricultural Imagery Program (NAIP) orthorectified digital aerial photos of Montana. The web services available include: ArcGIS Server Image services, Open Geospatial Consortium, Inc. (OGC) web coverage services (WCS), and OGC web map services (WMS). The image and web coverage services provide users direct access to the native GeoTIFF files and pixel data for geoprocessing and image analysis.

Imagery defaults to natural color. To view the imagery as false-color infrared (CIR), select band 4 as the red image, band 1 as the green, and band 2 as the blue.

The service is available in Open GIS Consortium (OGC) formats:
WCS: https://gisservicemt.gov/arcgis/rest/services/MSDI_Framework/NAIP_2013/ImageServer/WCSServer
WMS: https://gisservicemt.gov/arcgis/rest/services/MSDI_Framework/NAIP_2013/ImageServer/WMSServer

The data are also available from the State Library in three different formats:

They are downloadable as a collection of 698 compressed natural-color MrSID images, each 24 kilometers square. These images are in Montana State Plane coordinates, units meters. The web page for accessing these images is http://geoinfo.msl.mt.gov/data/Aerial_Photos/NAIP_2013.

They are downloadable as a collection of 56 compressed county mosaic (CCM) natural color MrSID images. These data are in UTM coordinates. The FTP folder containing these images is https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Imagery/2013_NAIP/UTM_County_Mosaics.

They are available from the State Library as a collection 11,776 4-band (near infrared, red, green and blue) TIFF images in UTM coordinates. Each image is about 170 megabytes. The tiling format of the TIFF imagery is based on 3.75 x 3.75 minute quarter-quadrangles with a 300 pixel buffer on all four sides.

An ESRI shapefile index showing the dates and times the images were acquired is available at https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Imagery/2013_NAIP/NAIP_2013_Dates.zip.

An ESRI shapefile index showing the extent of the individual TIFF image files is available at https://ftpgeoinfo.msl.mt.gov/Data/Spatial/MSDI/Imagery/2013_NAIP/NAIP_2013_tiff_index.zip.

To order TIFF images from the State Library, select the quadrangles you want from the tiff index shapefile and send them to the Library, along with a storage device of sufficient size to hold them and return postage for the device.

Time period of content:

Beginning date: 06/15/2013
Ending date: 09/11/2013
Currentness reference: ground condition

Access constraints: None

Use constraints:

The Montana State Library provides this product/service for informational purposes only. The Library did not produce it for, nor is it suitable for legal, engineering, or surveying purposes. Consumers of this information should review or consult the primary data and information sources to ascertain the viability of the information for their purposes. The Library provides these data in good faith but does not represent or warrant its accuracy, adequacy, or completeness. In no event shall the Library be liable for any incorrect results or analysis; any direct, indirect, special, or consequential damages to any party; or any lost profits arising out of or in connection with the use or the inability to use the data or the services provided. The Library makes these data and services available as a convenience to the public, and for no other purpose. The Library reserves the right to change or revise published data and/or services at any time.

Point of contact:

Montana State Library
PO Box 201800
Helena, MT 59620
Telephone: 406-444-5355
TDD/TTY telephone: Montana Relay 711
Fax: 406-444-0266
E-Mail: geoinfo@mt.gov

Data Quality Information:

Horizontal Positional Accuracy Report:

Farm Services Agency Digital Orthophoto Specifications. The specified accuracy for 1-meter imagery such as this is 6 meters.

Lineage:

Source information:

Originator:: U.S. Dept of Agriculture Farm Services Agency Aerial Photography Field Office
Publication date: 2013
Title: Aerial photography
Beginning date: 06/15/2013
Ending date: 09/11/2013

Process step:

Digital imagery was collected at a nominal ground sample distance (GSD) of 1.0 meters using seven Cessna 441 aircraft flying at an average flight height of 9052m above ground level. All aircraft flew with Leica Geosystem's ADS80/SH82 digital sensors with firmware 3.20 or newer. Each sensor collected 11 image bands. PanF27A,PanF02A and PanB14A panchromatic bands with a spectral range of 465-676nm. RedN00a and RedB16a with a spectral range of 604-664nm. GrnN00a and GrnB16a with a spectral range of 533-587nm. BluN00a and BluB16a with a spectral range of 420-492nm and Near-infrared bands NirN00a and NirB16a with a spectral range of 833-920nm. The CCD arrays have a pixel size of 6.5 microns in a 12000x1 format. Both the CCD's and the A/D convertors have a dynamic range of 12bits. The data is stored in 16bit format. The ADS is a push-broom sensor and the ground footprint of the imagery at NAIP scale is 12km wide by the flightline length. The maximum flightline length is limited to approximately 240km. The factory calibrations and IMU alignments for each sensor (Serial Numbers: 1321, 1413, 1420, 30012, 30017, 30022, 30034, and 30110) were tested and verified by in-situ test flights before the start of the project. The Leica ADS Flight Planning and Evaluation Software (FPES) is used to develop the flight acquisition plans. Flight acquisition sub blocks are designed first to define the GNSS base station logistics, and to break the project up into manageable acquisition units. The flight acquisition sub blocks are designed based on the specified acquisition season, native UTM zone of the DOQQs, flight line length limitations (to ensure sufficient performance of the IMU solution) as well as air traffic restrictions in the area. Once the sub blocks have been delineated they are brought into FPES for flight line design. The design parameters used in FPES will be 30% lateral overlap and 1.0m resolution. The flight lines have been designed with a north/south orientation. The design takes into account the latitude of the state, which affects line spacing due to convergence as well as the terrain. SRTM elevation data is used in the FPES design to ensure the 1m GSD is achieved over all types of terrain. The raw data was downloaded from the sensors after each flight using Leica XPro software. The imagery was then georeferenced using the 200Hz GPS/INS data creating an exterior orientation for each scan line (x/y/z/o/p/k). Technicians precisely measured tie points in 3 bands/looks (Back/Nadir/Forward) for each line using Leica Xpro software. The resulting point data and exterior orientation data were used to perform a full bundle adjustment with ORIMA software. Blunders were removed, and additional tie points measured in weak areas to ensure a robust solution. Once the point data was clean and point coverage was acceptable, photo-identifiable GPS-surveyed ground control points were introduced into the block adjustment. The bundle adjustment process produces revised exterior orientation data for the sensor with GPS/INS, datum, and sensor calibration errors modeled and removed. Using the revised exterior orientation from the bundle adjustment, orthorectified image strips were created with Xpro software and the April 2013 USGS 10m NED DEM. The Xpro orthorectification software applies an atmospheric-BRDF radiometric correction to the imagery. This correction compensates for atmospheric absorption, solar illumination angle and bi-directional reflectance. The orthorectified strips were then overlaid with each other and the ground control to check accuracy. Once the accuracy of the orthorectified image strips were validated the strips were then imported into Inpho's OrthoVista 4.6 package which was used for the final radiometric balance, mosaic, and DOQQ sheet creation.

Spatial Reference Information:

Horizontal coordinate system definition:

Grid coordinate system name: Universal Transverse Mercator

UTM zone number: 11, 12, or 13

Planar distance units: meters

Geodetic model:

Horizontal datum name: North American Datum of 1983
Ellipsoid name: Geodetic Reference System 80
Semi-major axis: 6378137.000000
Denominator of flattening ratio: 298.257222

Distribution Information:

Distributor:

Montana State Library
PO Box 201800
Helena, MT 59620
Telephone: 406-444-5354
TDD/TTY telephone: Montana Relay 711
Fax: 406-444-0266
E-Mail: geoinfo@mt.gov

Resource description: Live Data and Maps

Standard order process:

Digital form:

Metadata Reference Information:

Metadata date: 03/07/2016

Metadata review date: 09/22/2014

Metadata contact:

Montana State Library
PO Box 201800
Helena, MT 59620
Telephone: 406-444-5354
TDD/TTY telephone: Montana Relay 711
Fax: 406-444-0266
E-Mail: geoinfo@mt.gov